Custom Search
Showing posts with label polyoxin-D. Show all posts
Showing posts with label polyoxin-D. Show all posts

Fungicide Review: Polyoxin D


Polyoxin-D: Mother Nature’s gift for fighting Rhizoctonias (and some other important diseases).

Polyoxin-D zinc salt is the active ingredient in two turfgrass fungicides: Endorse (Arysta) and Affirm (Cleary Chemical). There’s been some switching around of names and products since 2009 (as discussed last year) when Arysta LifeScience took back the distribution rights for the 2.5% WP formulation and Cleary’s introduced Affirm, a 11.3% WDG formulation, that contained the same active ingredient. Either way, both formulations have the same range of disease control and I haven’t seen any data so far to suggest that the two formulations have any significant differences in disease control between them. Polyoxin D is classified as a FRAC Group 19 fungicide (polyoxin antibiotics) and presently, only polyoxin D is registered as a turf fungicide in the U.S. (Image to the right taken from alanwood.net)

There are a number of other polyoxins out there (polyoxin A, polyoxin B,…polyoxin J, etc.), and they all share a common “ancestry” as far as being discovered as metabolites of Streptomyces bacteria (which are commonly called Actinomycetes). Streptomyces are typically soil inhabiting bacteria and are potent producers of some very important anti-bacterial and anti-fungal antibiotics. Interestingly, antibiotics derived from Streptomyces species account for two-thirds of our commercially available antibiotics including streptomycin, chloramphenicol, tetracycline and vancomycin (anti-bacterials) and nystatin and amphotericin B (anti-fungals).

Polyoxin D was discovered in 1965 as a fermentation product of Streptomyces cacoi var. asoensis (Suzuki et al 1965 Journal of Antibiotics Ser. A), so interestingly, this molecule has been around for a long time! Commercial fungicides containing polyoxin D utilize this active ingredient in the form of a zinc salt. Why, may you ask? Because the polyoxin D molecule is extremely water soluble and it would wash off of plant surfaces easily; the zinc salt form of polyoxin D is much more stable and enhances the longevity of the fungicide on the plant surface.

Biochemically, polyoxin D inhibits the formation of chitin, which is the main component of the cell walls of true fungi (Ascomycetes, Basidiomycetes, etc.). You can see from the photo here (taken from Endo et al. Journal of Bacteriology 1970), that fungal cells treated with polyoxin D (top photo) are unable to make functional cell walls and thus can’t function normally like the untreated ones (bottom photo).

Since Oomycetes like Pythium don’t use chitin in their cell walls, polyoxin D won’t affect these “water mold” type fungi. Polyoxin D is considered a local penetrant fungicide, and does not translocate easily upwards in plants like some other systemic fungicides, so coverage is important when applying these.

The earliest use of polyoxin D was for the control of rice sheath blight (Rhizoctonia solani) in Japan back in the 1970s. Not surprisingly, for turf diseases, Endorse and Affirm would be considered strongest against Rhizoctonia diseases like brown patch, large patch and yellow patch and the Rhizoctonia-like Waitea diseases like brown ring patch and leaf and sheath spot.

In a large patch trial we did in 2008, you can see that Endorse was very good in controlling large patch.

Applications made 16 Apr and 6 May to bermudagrass

In a brown ring patch trial also conducted in 2008, Endorse provided some of the quickest control of the disease, but didn’t have as much residual as some other treatments. We suggest tank mixing Endorse or Affirm with another fungicide like a DMI (Banner MAXX, Tourney, Triton or Torque) to get good knock down and added residual.


One curative application made on 26 Apr

In our California trials, we’ve seen it been pretty good against anthracnose and although other materials seemed to be better, Endorse and Affirm could certainly be added into the summer rotation.


Six applications total from Jun to Aug, 2005 data

Other diseases on the labels include pink and gray snow molds (it seems like they are best tank mixed with another fungicide for the best control, but ask Jim about that one), red thread, leaf spots, gray leaf spot, and fairy ring.

Endorse looked pretty good vs. fairy ring in trials conducted by myself and Mike Fidanza :www.gcsaa.org/gcm/2007/may/pdfs/treatingFR.pdf

However, I can’t say that I’d recommend polyoxin D by itself for gray leaf spot, I just haven’t seen enough data to say it’s a good choice for this disease when other fungicides are available.

OK – that’s enough geeking out for tonight – until next week, signing off from the Right Coast….

Brown Ring Patch, Polyoxin-D & Savage Pathology Style Q&A


Sorry for barging in on Megan's Friday posting but better late than never :)

Brown Ring Patch on Creeping Bentgrass in Arizona?
Gabe Towers (Target Specialty Products) in Arizona sent these pictures in from a creeping bentgrass green at a course outside of Phoenix. According to his observations, it's definitely a Rhizoctonia-type disease and the mycelia and symptoms look an awful lot like what we would expect brown ring patch to look like on bentgrass. Unlike the bright yellow rings associated with the disease on annual and rough bluegrass, brown ring patch on bentgrass makes nice brown sunken rings. These symptoms are like those first described for the disease orginally in Japan on this turf type.








































One of the things that we're seeing here is also the development of patches without rings. Although rings are typically seen with the disease, we did isolate Waitea circinata var. circinata from similar patches in Idaho last year.

The most compelling evidence for brown ring patch would be the presence of aeial mycelium after incubation plus the sunken degraded thatch on the greens.

We're working with Gabe right now to confirm the pathogen identity, but if it is brown ring patch, that'd be a first for the disease on creeping bentgrass in Arizona.

Polyoxin-D: Soon Available in Two Fruity Flavors!
Well, not really. Polyoxin-D fungicides kind of smells like Top Ramen to me. Polyoxin-D has proven to be one of the best fungicides for brown ring patch control and will soon be available from two companies in 2010. There's a little bit of a backstory on this one, but I'll skip the details and just say that two formulations from two different companies will be available soon.

Endorse 2.5WP is now part of Arysta's line of turf fungicides. It was previously marketed and distributed by Cleary Chemical, and we should expect no major changes to the label and the use rate will continue to be at 4 oz per 1,000 sq ft.

Cleary Chemical will now be selling Affirm 11.3WDG. This has about 4x more polyoxin-D than Endorse, so the expected use rate will be 1 oz per 1,000 sq ft.

For more information (as it becomes available) please see the maunfacturer websites:
http://www.arystalifescience.com
http://www.clearychemical.com

Question of the Week
This is kind of a new feature for the Left Coast blog, but inspired by columns such as Dear Abby, Car Talk, and Savage Love, and the slow down of info this winter, I'm going to try to post Q&As recieved by email.

Hi Frank,

I am looking for a third product for snow mold control on poa greens (monterey peninsula). My curent rotation is Instrata followed by Chipco GT every 14 to 21 days depending on the disease pressure. I was considering Eagle in combo with Fore any thoughts?

Thanks in advance,
Moldy in Monterey


Dear Moldy -

Pink snow mold in California can be tricky since it can fire at cold (< 65F daytime temps) and wet conditions without snowfall. As you know, it can go from 50 to 80F in a week in parts of California during the winter, especially in southern California, making this disease somewaht unpredictable. As such, creating a clear, defined pink snow mold (aka Microdochium patch) preventive fungicide program can be dififcult and often superintendents end up making a lot of curative applications for this disease. Please look at page 16 from Paul Vincelli's (University of Kentucky) overview of turf fungicides - the ratings are based on the average of trials performed for the last 10 or so years over all of the US.

www.ca.uky.edu/agc/pubs/ppa/ppa1/ppa1.pdf

Can you use PCNB? If you consistently stay below 70F during the winter - PCNB is really useful - long lasting, no resistance, cheap - but, if it goes over 70F, you can potentially get burn and or root pruning at high rates. Maybe target PCNB apps for the coldest part of the year , saving your Instrata applications for times when temps can get warmer.

Since Instrata = Banner + Medallion + Daconil, Medallion and Daconil are probably limited as alternate rotation partners due to label rate limitations.

You can use another DMI (Banner, Eagle, etc..) in the rotation since DMI resistance really hasn't been an issue for pink snow mold yet - but as you can see from Paul's chart, some DMIs work better than others. It'd probably be a good idea to mix this application with something else for added protection. As you indicated, mancozeb (Fore) is a good choice in your case.

I think the QoIs (Heritage, Compass, Insignia, Disarm) can be dicey for snow mold control; we've seen a few cases of resistance in CA, but this topic needs a lot more research. Thiophanate-methyl should be used with caution, resistance has been around in WA since the 1980s.

Finally, good call on the Chipco 26GT as a rotation partner. Since tolerance may be an issue in some places, keep the rates on the higher end or mixing with a contact such as mancozeb in your rotation may help.

How's that sound?

Thanks,
Frank

That's it for this week. Signing off from the Left Coast.....
Related Posts with Thumbnails